Installation Guide
Pampavanna Magnetic Knife Holder Installation Guide
Upgrade your kitchen with a clean, modern, space-saving organization system designed for everyday use.
Installation Video
Watch the quick installation video below before mounting your holder:
https://www.youtube.com/shorts/MH7EvRoRouA
Adhesive Installation Instructions
Step 1 — Clean the Surface
Use a clean dry cloth to remove dust, grease, or moisture from the wall or refrigerator surface.
✅ Best for smooth surfaces such as:
- Tile
- Metal
- Glass
- Smooth painted walls
- Refrigerators
❌ Not recommended for:
- Textured walls
- Rough surfaces
- Brick surfaces
Step 2 — Remove Adhesive Protection
Carefully peel off the adhesive backing without touching the adhesive surface.
Step 3 — Position the Holder
Align the magnetic knife holder carefully before mounting.
Once applied, press firmly against the wall.
Step 4 — Press Firmly
Press and hold firmly for approximately 60 seconds to ensure strong adhesion.
Step 5 — Wait 24 Hours
⚠️ IMPORTANT:
Allow the adhesive to cure for 24 hours before placing knives or kitchen tools on the holder.
This helps achieve maximum adhesive strength and long-lasting performance.
Step 6 — Organize Your Knives
- Place knives evenly across the holder.
- For best balance:
- heavier knives should be centered
- avoid overloading one side
Troubleshooting
Holder Falling Off
- Ensure surface is smooth and clean
- Wait the full 24 hours before use
- Avoid textured walls
Magnets Feel Weak
- Large or heavy knives should be centered
- Ensure knives fully contact the magnetic surface
Refrigerator Scratching Concerns
Avoid sliding the holder across refrigerator surfaces.
Protective pads help reduce surface contact.
Need Help?
Contact Pampavanna Support:
We’re happy to help with installation questions or troubleshooting.
Thank you for supporting Pampavanna.